LFY4-LED
Introducing our linear vapourproof LED fixture, designed for versatility and durability in demanding environments. With adjustable lumen and color temperature settings and wide voltage range ensures compatibility to suit application in industrial and commercial spaces. The fixture combines rugged construction and contractor friendly installation and advanced features to deliver reliable, tailored illumination.
Features:
Stainless Steel Clips
Housing designed to avoid clips failing. Also fewer clips required while maintaining NEMA 4X and IP6
Wider Profile
4.6″ wide to cover Standard junction box.
Fewer Components
Reduce the number of pieces making it easier to install.
Offset Driver
Driver is offset from the center and comes with 1′ long input cable.
Perfect Flat Housing Back
Leaves no gap with mounting surface.
Straightforward Assembly
2 conduit entries at each end, and guide marks at the back for conduit entries.
Cover for CCT and Wattages Switches
Prevents accidental changes to settings.
Quick Disconnect
Detach housing and lens/LED board easily.
This product is not suitable for car washes. Please see our LFW-LED series for car wash applications.
Specifications
| Light Output | 6400/4300/2850 lm |
| Efficacy | 144 lm/W |
| CCT | CCT Selectable - 3500K/4000K/5000K |
| Beam Angle | 113° |
| CRI | 84 |
| Replaces Up To | 2 Lamp T8 |
| Wattage | 41/30/20 W |
| Voltage | 120-277 V |
| Surge Protection | 2kV (Built-in Driver) as per IEC/EN 61000-4-5 |
| Power Factor | >0.96 |
| THD | <17% |
| Dimming | 0-10V (Continuous dimming to 10% or below) |
| LED Life (L70) | 170,000 Hrs |
| Battery Backup | 8W Battery Back Up (Optional) |
| Multifunction Sensor | Dimming High Frequency Motion Sensor |
| Ambient Operating Temperature | Fixture: 40°C to 40°C (-40°F to +104°F), With Battery Back Up: 10°C to +40°C (50°F to +104°F), With Motion Sensor: -40°C to 40°C (-40°F to +104°F) |
| Mounting | Surface/Ceiling Mount, Adjustable Stainless Steel Surface Mount Clips included in the box |
| Housing | Polycarbonate; 5VA Flamability rated as per UL94; Outdoor rated (f1) as per UL746C |
| Lens | Frosted Polycarbonate; Outdoor rated (f1) as per UL746C |
| Clips | Stainless Steel Clips (8x) |
| Finish | Grey |
| Predrilled Conduit Entries | Two (one at each end); Fits PG 13.5 cable gland; suitable for upto 5X18AWG Service Cables |
| Guide Mark | One at Center from inside; Two adjacent to the center pilot hole |
| Electrical Cable lengths | 1' input LED driver cable length |
| Certifications | cETLus certified per UL1598 & CSA C22.2 NO. 250.0:21, DLC Premium, DLC Standard,Wet Location, IP66, NEMA4X, NSF, IK10 |
| Default CCT | 4000K |
| Default Wattage | 41W |
- RDA_LFY4-LED_SpecSheet_112024-1
Spec Sheets
- RDA_LFY4_IES_RDA_072024
